|
ROMER
27240 Haggerty Road
Suite E-20
Farmington Hills, MI
48331
_____________________
Phone: (800) 218 - 7125
Fax: (248) 324 - 0525
_____________________
|
ROMER SERIES
Full six axis articulation with “human arm” proportions.
Infinite rotation of joints for unhindered inspection in tight or hard-to-reach areas.
High-grade carbon graphite construction makes arm highly stable.
Robust enough for use on assembly lines, foundries and repair sites.
Mountable in any orientation, even upside down.
6 to 12 foot diameter measuring envelopes for versatile inspection of parts, fixtures, vehicle interiors. machinery, reverse engineering, etc.
Accuracy to +/- 0.0008".
Complete system includes pentium computer & powerful Suprastuff Software.
Interfaces to other popular CMM and Engineering software.
Link to Benders: Supravision software SENDS and RECALLS using a robust Supravision Network Protocol that is immune to timing problems related to CPU speed differences between the two communicating computers. It also includes a variety of formats for linking to several bender types.
Benderlink Note: This measuring center can be electronically linked to several CNC benders with the Advanced Tubular Technologies'
Benderlink system.
TubeCAD and TubeCalc Note: This measuring center creates files that can be read and written by the Advanced Tubular Technologies' TubeCAD and TubeCalc software.
Advanced Tubular Technologies is the authorized communications integrator for Romer.
|
|
MULTI SYSTEMS SERVICE CO.
8616 Hamilton Avenue
Huntington Beach, CA 92646
_____________________
Phone: 714 960-6629
Fax: 714 969-3161
_____________________
|
MULTI MEASURE 5000
Five Axis Articulated Arm (A sixth encoder is added just after the C axis in
order to measure twist deflection in the arm. This feature increases
accuracy significantly.)
All Direct-Drive System
Light Weight Carbon Graphite Material with Alumimum Enclosed Encoders at Joints
Accuracy: Measures at ANY location around the table with an accuracy of +/- 0.005
inches.
Probe/Sensor: Ultra-slim probe for measuring in tight spots. Quick change self-aligning
probe system. Allows change from infrared sensors to ball probes.
Software: Supravision software written by Romer. Optional Suprastuff software for
measuring objects around the tube shape like brackets. Suprastuff can be used to
measure and verify wood gauges.
Computer System: Pentium CPU with 1 Gigabyte Hard Drive.
Pointer: Arm or Mouse
Printer: Hewlett Packard DeskJet Printer
Monitor: VGA color on moveable pedestal for optimum viewing
Link to Benders: Supravision software SENDS and RECALLS using a robust Supravision Network Protocol that is immune to timing problems related to CPU speed differences between the two communicating computers. It also includes a variety of formats for linking to several bender types.
Benderlink Note: This measuring center can be electronically linked to several CNC benders with the Advanced Tubular Technologies'
Benderlink system.
TubeCAD and TubeCalc Note: This measuring center creates files that can be read and written by the Advanced Tubular Technologies' TubeCAD and TubeCalc software.
Advanced Tubular Technologies is the authorized communications integrator for Multi Systems
|
|
ADDISON TUBE FORMING LIMITED
189 Bradkirk Place
Walton Summit Centre
Bamber Bridge, Preston
Lancshire PR5 8AJ
ENGLAND
_____________________
Phone: 011 44 772 34511
Fax: 011 44 772 323227
_____________________
|
ADDATA-PLUS
Five Axis Articulated Arm
TubeCAD Note: This measuring center creates files that can be read and written by
the Advanced Tubular Technologies' TubeCAD software.
ADDISCAN 2 VISION TECHNOLOGY
|
|
EATON LEONARD, INC.
6030 Avenida Encinas
Carlsbad, CA 92009
USA
_____________________
Phone: 619 438-3168
Fax: 619 929-5099
_____________________
|
LASERVISION
Five Axis Articulated Arm
All Direct-Drive System
Menu-driven user-friendly software
Laser probe with non-contact scanning for superior accuracy
Visible laser projects a red beam on the tube for visual location feedback
Audible prompting provides measurement feedback without having to look at the monitor
Computer System: 80486 CPU
Pointer: Arm or Touch Screen
Hard Disk: stores over 100,000 part shapes
Printer: 80-column dot-matrix printer
VGA color monitor on moveable pedestal for optimum viewing
Link to Benders: Bi-directional communications with CNC tube benders reduces
set-up time
Benderlink Note: This measuring center can be electronically linked to Chiyoda
or Keins CNC benders with the Advanced Tubular Technologies' Benderlink system.
TubeCAD Note: This measuring center creates files that can be read and written by
the Advanced Tubular Technologies' TubeCAD software.
|
MiiC AMERICA
(Link to the German division)
21064 Bridge Street
Southfield, MI 48034
_____________________
Phone: 810 353-0380
Fax: 810 353-0384
_____________________
|
OPTON
The MiiC Opton Measuring Center
|
