What is SW2Bender Software?
SW2Bender software is designed to allow data to be converted from Solidworks 3D Sketch Mode tube shapes to data that is compatible with the Advanced Tubular bender communications software called Benderlink.
SW2Bender Program Features
- Runs with Solidworks running in the background
- Complete conversion to Supravision (Sheffield, Romer, MM5000, Advanced Tubular Benderlink
- Supravision file format is compatible with many measuring centers
- Compatible with Advanced Tubular's Benderlink Communications Software
Sample Log Output of Conversion
[2/7/2005 12:17:52 PM] Search for end point...
[2/7/2005 12:17:52 PM] End of Tube Found at Line 1 - End A
[2/7/2005 12:17:52 PM] Next ARC found: 1 - is now ARC 1 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 2 - is now LINE 2
[2/7/2005 12:17:52 PM] Next ARC found: 2 - is now ARC 2 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 3 - is now LINE 3
[2/7/2005 12:17:52 PM] Next ARC found: 3 - is now ARC 3 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 4 - is now LINE 4
[2/7/2005 12:17:52 PM] Next ARC found: 4 - is now ARC 4 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 5 - is now LINE 5
[2/7/2005 12:17:52 PM] Next ARC found: 5 - is now ARC 5 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 6 - is now LINE 6
[2/7/2005 12:17:52 PM] Next ARC found: 6 - is now ARC 6 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 7 - is now LINE 7
[2/7/2005 12:17:52 PM] Next ARC found: 7 - is now ARC 7 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 8 - is now LINE 8
[2/7/2005 12:17:52 PM] Next ARC found: 8 - is now ARC 8 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 9 - is now LINE 9
[2/7/2005 12:17:52 PM] Next ARC found: 9 - is now ARC 9 - reversed
[2/7/2005 12:17:52 PM] Next LINE found: 10 - is now LINE 10
XYZ Intersection Centerline
1 - X:0.00000, Y:0.00000, Z:0.00000
2 - X:12.98450, Y:-17.97546, Z:-9.80498, R:10.00000
3 - X:78.39337, Y:-17.97546, Z:-9.80498, R:10.00000
4 - X:109.16717, Y:-21.18555, Z:-14.78335, R:10.00000
5 - X:170.91801, Y:-21.18555, Z:-14.78335, R:14.00000
6 - X:170.91801, Y:-21.18555, Z:13.64975, R:14.00000
7 - X:108.59444, Y:-21.18555, Z:13.64975, R:10.00000
8 - X:80.45061, Y:-21.18555, Z:6.50331, R:10.00000
9 - X:15.14208, Y:-21.18555, Z:6.50331, R:7.00000
10 - X:15.14208, Y:-21.18555, Z:28.34068, R:7.00000
11 - X:15.14208, Y:0.18099, Z:28.34068
[2/7/2005 12:17:52 PM]
Calculating Bender Data Now...
[2/7/2005 12:17:52 PM]
LRA Bender Data
1 - Length:18.74590
2 - Length:58.95542
3 - Length:29.43135
4 - Length:46.79715
5 - Length:0.43310
6 - Length:47.07377
7 - Length:26.53740
8 - Length:57.05874
9 - Length:7.83737
10 - Length:14.36654
[2/7/2005 12:17:52 PM]
2 - Rotation: -151.42508
3 - Rotation: -180.00000
4 - Rotation: 32.81418
5 - Rotation: 0.00000
6 - Rotation: 0.00000
7 - Rotation: 180.00000
8 - Rotation: 0.00000
9 - Rotation: 90.00000
[2/7/2005 12:17:52 PM]
1 - Angle:57.61952 - Radius: 10.00000
2 - Angle:10.89548 - Radius: 10.00000
3 - Angle:10.89548 - Radius: 10.00000
4 - Angle:90.00000 - Radius: 14.00000
5 - Angle:90.00000 - Radius: 14.00000
6 - Angle:14.24772 - Radius: 10.00000
7 - Angle:14.24772 - Radius: 10.00000
8 - Angle:90.00000 - Radius: 7.00000
9 - Angle:90.00000 - Radius: 7.00000
