Benderlink IV Software

USA and INTERNATIONAL PRE-PACKAGED PRICE INFORMATION

**Benderlink Prices will increase by 10% on January 1, 2003**
    Index

  • PACKAGE 1 - Self-Install Windows 98/NT Communications for KEINS and CHIYODA Benders

  • PACKAGE 1i - Package 1 with On-site installation and training

  • PACKAGE 2e-4 - Package 1 with long-distance ethernet electronics for up to four benders. You perform the installation of all components.

  • PACKAGE 2e-8 - Package 1 with long-distance ethernet electronics for up to eight benders. You perform the installation of all components.

  • PACKAGE 2ei-4 - Package 1 with long-distance ethernet electronics for up to four benders, plus we perform the installation and training.

  • PACKAGE 2ei-8 - Package 1 with long-distance ethernet electronics for up to eight benders, plus we perform the installation and training.

  • PACKAGE 2eui-4 - UPGRADE to Full Ethernet plus on-site installation for up to four benders.

  • PACKAGE 2eui-8 - UPGRADE to Full Ethernet plus on-site installation for up to eight benders.

  • PACKAGE 3ei-4 - Package 1 with long-distance ethernet electronics for up to four benders, plus we perform the installation and training and we supply a complete computer system and station. (Station includes - desk, chair, etc.)

  • PACKAGE 3ei-8 - Package 1 with long-distance ethernet electronics for up to eight benders, plus we perform the installation and training and we supply a complete computer system and station. (Station includes - desk, chair, etc.)

  • PACKAGE OFFLINE - Non-Communications version of Benderlink

  • ADD-ON OPTIONS


  • Click here to download a PDF version of the Benderlink Packages (5.27 MB, 5 pages)

  • Click here  to download an Adobe PDF file for the AutoCAD to Benderlink conversion software (473 KB, 1 page)

    Download Adobe Acrobat Reader.

Package 1 - Self Install
Windows 98/NT communications for KEINS or CHIYODA benders

This is the price for each single workstation Benderlink IV license.
Manual

Package Contents

1. Benderlink (for networking your bender to other devices like measuring centers)
2. TubeCalc (for entering XYZ data and viewing tube shapes)
3. Bender to XYZ Calculator (for calculating centerline data from bender data)
4. Overbend Calculator (for calculating overbend values for springback compensation)
5. FIF Translator (for importing Eagle-Eaton Leonard data)
6. Benderlink Offline Programmer (for entering XYZ data, converting to LRA, and importing Pro/E data)
7. ATT Calculator (Basic functions for tube fabricators like trigonometry calculations, conversions, arc length, tangent distances, adding fractional pip lengths)
8. Built-in BACKUP software with full compression capabilities

RS232 Cable Package is shipped with

1. Benderlink Installation CD: for Windows 95/98/NT
2. RS-232 cable: 100 feet of direct-connect

Benderlink Package 1 (U.S.A.)

Benderlink Package 1 (International)

  $5950

  $6950


These prices include shipping and handling. The international price includes shipping, handling, and duties. Note that terms for direct international shipments is "prepaid" only. Terms may vary if international customers purchase from an international dealer.

Package 1i - With On-Site Installation
Fully Installed - 1 Day On-site Service

This software package is identical to Package 1 above, but we install the package at your plant and provide training.

Package Contents

1. Benderlink Package 1 See above
2. LINK 1 BENDER: 1 day of on-site service

Manual Package is delivered with

1. Benderlink Installation CD: for Windows 95/98/NT
2. RS-232 cable: 100 feet of direct-connect
3. Installation
4. Training

Benderlink Package 1i (U.S.A.)

Benderlink Package 1i (International)

  $11,500

  Call for a quotation


These prices include shipping and handling. The international price includes shipping, handling, and duties. Note that terms for direct international shipments is "prepaid" only. Terms may vary if international customers purchase from an international dealer.



Go back to Index

Package 2e-4 - You perform installation of Components

Package 2e-8 - You perform installation of Components

Long Distance Ethernet

For the tube fabricator who wants Ethernet-based industrial communications solution for KEINS and CHIYODA benders. We provide all of the components and you do the installation.

Package Contents

Benderlink Software listed in package 1

4 or 8 port Ethernet Module (When connecting 1-4 benders you receive a 4 port hub, More than 4 you get an 8 port hub.)

300 feet of Ethernet cable (Use the category-5 cable to connect between the Benderlink computer's Ethernet hub and the Benderlink Ethernet Module)

50 feet of bender cable for up to 4 benders on the Benderlink Ethernet Module (connects the module to each other)

Benderlink Package 2e-4 (U.S.A.) - UP TO 4 BENDERS

Benderlink Package 2e-8 (U.S.A.) - UP TO 8 BENDERS

Benderlink Package 2e-4 and 2e-8 (International)

  $10,200

  $12,000

  Contact us for a quotation


These prices include shipping, handling, travel, and time spent on-site in the domestic U.S. The international price depends entirely on costs involved for travel to the region. Terms may vary if international customers purchase from an international dealer.




Go back to Index

Package 2ei-4 - On-Site installation

Package 2ei-8 - On-Site installation

Fully Installed Using Standard Ethernet

For the tube fabricator who wants vendor-installed Ethernet-based industrial communications solution for KEINS and CHIYODA benders. We provide complete installation and training for Benderlink packages. When on-site, we will install the software and hardware to your system and provide complete training.

Package Contents

Benderlink Software listed in package 1

4 or 8 port Ethernet Module (When connecting 1-4 benders you receive a 4 port hub, More than 4 you get an 8 port hub.)

300 feet of Ethernet cable (Use the category-5 cable to connect between the Benderlink computer's Ethernet hub and the Benderlink Ethernet Module)

50 feet of bender cable for up to 4 benders on the Benderlink Ethernet Module (connects the module to each other)

UP TO 4 BENDERS: 2 days of on-site service

UP TO 8 BENDERS: 3 days of on-site service

2 days travel (to/from) your factory

Benderlink Package 2ei-4 (U.S.A.) - UP TO 4 BENDERS

Benderlink Package 2ei-8 (U.S.A.) - UP TO 8 BENDERS

Benderlink Package 2ei-4 and 2ei-8 (International)

  $15,700

  $17,200

  Contact us for a quotation


These prices include shipping, handling, travel, and time spent on-site in the domestic U.S. The international price depends entirely on costs involved for travel to the region. Terms may vary if international customers purchase from an international dealer.



Go back to Index

Package 2eui-4 - UPGRADE to ETHERNET from RS-422 or RS-232


Package 2eui-8 - UPGRADE to ETHERNET from RS-422 or RS-232



On-Site Installation for existing Benderlink customers

For the tube fabricator who wants to upgrade to Ethernet-based communications system for communications with KEINS and CHIYODA benders.

Package Contents

  • Benderlink components listed in Package 2e
    Connect up to 8 benders using the reliable Ethernet protocol. (You can add any number of benders by adding more modules.)

    UP TO 4 BENDERS: 2 days of on-site service

    UP TO 8 BENDERS: 3 days of on-site service

    2 days travel (to/from) your factory

    Benderlink Package 2eui-4 (U.S.A.) - UP TO 4 BENDERS

    Benderlink Package 2eui-8 (U.S.A.) - UP TO 8 BENDERS

    Benderlink Package 2eui-4 and 2eui-8 (International)

      $12,700

      $14,500

      Contact us for a quotation


    These prices include shipping, handling, travel, and time spent on-site in the domestic U.S. The international price depends entirely on costs involved for travel to the region. Terms may vary if international customers purchase from an international dealer.


    Go back to Index

    Package 3ei-4 - On-Site Installation

    Package 3ei-8 - On-Site Installation


    Ethernet-based Benderlink with a pre-configured Dell Windows 2000 Computer System.

    For the tube fabricator who wants a complete turnkey Benderlink system including a network workstation computer.

    Click here to see the assembly and testing of a Benderlink 3ei system.

    Package Contents

    Benderlink Software listed in Package 1

    UP TO 4 BENDERS: 2 days of on-site service

    UP TO 8 BENDERS: 3 days of on-site service

  • 2 days travel (to/from) your factory

    Package shipped with

    Windows 2000     - completely pre-configured for Benderlink.

    Benderlink Ethernet Module - allows connection to 8 benders from the single Benderlink computer   (with Ethernet hub)  through the supplied Ethernet network.

    Benderlink components listed in Package 2ei

    Benderlink Package 3ei-4 (U.S.A.) - UP TO 4 BENDERS

    Benderlink Package 3ei-8 (U.S.A.) - UP TO 8 BENDERS

    Benderlink Package 3ei-4 and 3ei-8 (International)

      $18,700

      $20,500

      Contact us for a quotation


    These prices include shipping, handling, travel, and time spent on-site in the domestic U.S. The international price depends entirely on costs involved for travel to the region. Terms may vary if international customers purchase from an international dealer.


    Package Offline - Self Install
    Windows 98/NT communications for KEINS or CHIYODA benders

    This is the price for each single workstation Benderlink IV offline programmer

    NOTE: This software is for editing Benderlink data at a remote location. It is Benderlink software with a special license that disallows all communications with benders or measuring centers.

    Package Contents

    1. Benderlink

    Package is shipped with

    1. Benderlink Installation CD: for Windows 95/98/NT

    Benderlink Offline Package (U.S.A.)

    Benderlink Offline Package (International)

      $900

      $1150


    These prices include shipping and handling. The international price includes shipping, handling, and duties. Note that terms for direct international shipments is "prepaid" only. Terms may vary if international customers purchase from an international dealer.

    Go back to Index

    ADD-ON OPTIONS

    AutoCAD to Benderlink Converters


    DXF2KEINS software is designed to quickly and automatically convert your AutoCAD* drawings into Benderlink for KEINS compatible files.(DXF2CHIMQ41 and DXF2CHIMQ85 conversion packages are also available for two models of Chiyoda benders.)

    Click here for more information.

    *(Any CAD package that can build DXF files is compatible! - AutoCAD, TurboCAD, IntelliCAD, CADKEY, Microstation, FastCAD, Ashlar Vellum 3D.......)

    Add 8 Benders To Benderlink

    Add up to 8 more KEINS and CHIYODA benders to your Benderlink system by adding another Benderlink ETHERNET MODULE to your system.


    Benderlink Ethernet Module 4 (U.S.A.)

    Benderlink Ethernet Module 4(International)

    Benderlink Ethernet Module 8 (U.S.A.)

    Benderlink Ethernet Module 8(International)

      $3000

      $4000

      $3300

      $4300

    Benderlink AUC Price (USA)
    (Annual Update Contract)

    Benderlink AUC

    $1000.00 annually per license*

    The Benderlink Annual Update Contract is an automatic software update service that allows customers to keep up with the latest changes in Benderlink automatically, as soon as new revisions are released.

    *This contract is renewable on an annual basis. Updates are supplied as long as the contract is current.

    Before purchasing this contract the first time, it is necessary for your company to have upgraded to the to the latest major version.

    The AUC price for a single site license is $1000.

    Please contact Advanced Tubular Technologies if you have questions about Benderlink.

    Click here to return to the home page.

    		•